Pumpd Instructions
METHOD ONE
- Wipe your breast to remove any moisturiser and to clean the skin.
- Place your thumb on the milk droplet under the flange of the pump, while gripping the body of the pump with your other fingers.
- Press down with your thumb on the milk droplet to meet your fingers squeezing the body of your pump.
- Position your pump over your nipple, making sure your nipple is pointing down and sitting in the neck of the pump.
- Once comfortable and your nipple is sitting in a position which feels secure, release your grip from the pump.
- The flange of the pump will stay secured to the skin around your nipple creating a suction. If this suction is causing your skin to pull or feel uncomfortable, simply release some air from the pump or re position your pump in a more comfortable position on your breast.
- Leave your pump in place and empty into a storage container once almost full, simply re attach to your breast afterwards if you wish to keep collecting milk.
METHOD TWO
- Wipe your breast to remove any moisturiser and to clean the skin.
- Fold back the flange of the pump to the base of the pump neck.
- With your thumb and fore finger holding the flange back, place the centre of the pump neck over your nipple.
- Once comfortable and your nipple is sitting in the centre, gently release the flange and allow the pump flange to sit flat on the skin around your nipple.
- The flange of the pump will stay secured to the skin around your nipple, creating a suction. If this suction is causing your skin to pull or feel uncomfortable, simply release some air from the pump or reposition your pump to a more comfortable position on your breast.
- Leave your pump in place and empty into a storage container once almost full. Reattach to your breast afterwards if you wish to keep collecting milk.
HOW TO INCREASE YOUR LET DOWN
If you have attached your pump and are struggling to get your breast to let down or use your Pumpd pump when not feeding from your other breast, we have a few tips to help.
Place your Pumpd pump over your nipple, without attaching your pump to your breast with suction. Squeeze the base of the pump in and out every second. Do this for 30seconds – 1 minute. Then, using one of the above two methods, attach your pump to your breast.
Gently massage the top of your breast with a warm flannel or use your pump straight after a warm bath or shower.
Once attached to your breast, gently squeeze the base of the pump every second for 30seconds – 1 minute. Be careful to only squeeze the base gently to avoid the suction being tampered with.
WAYS TO USE YOUR PUMP
- While feeding
- When not feeding
- Mastitis
- To draw out inverted nipples
- Engorgement
- Pump and Dump
STERILISING PUMPD PUMPS
As our Pumpd Pumps are made of silicone, you do not need to use any harsh chemicals to sterilise. Simply boil for 3-5 minutes.
We recommend to always sterilise your pump when your baby is under 3 months old. Once your baby is over 3 months old, you don’t need to sterilise your pump, just clean it thoroughly. If you wish to continue sterilising your Pumpd pump however, that is totally fine and up to you.
CLEANING INSTRUCTIONS
1. Wash in warm soapy water after each use and allow to air dry upside down.
2. Although dishwasher safe, we always recommend to hand wash your Pumpd pump as other food particles in the dishwasher can cause mastitis and other nipple irritations.
3. Once dry, store your pump with the lid attached to prevent contamination to the flange and pump body.